Vienna ensemble pro 6 ip address
If you have configured port 80 to VioStor, enter the address to access the VioStor (the default port of HTTP is 80): 219.87.144.205/ When you need to login the VioStor by FTP (port 21).Īfter changing the settings, enter the address in the browser to access the VioStor over the Internet: 219.87.144.205:8000/ When you use the alarm function of the remote IP camera (the alarm between the NVR and the camera is delivered by FTP). The port 21 must be forwarded on the router in the following two situations: To specify the RTSP port of the IP camera, add a slash (/) and RTSP port number after the HTTP port number. Note:The "Port" field refers to the HTTP and RTSP port. If your IP camera is installed behind the NAT router, enter the public IP address (or URL) and configure the port forwarding correctly.Įnter the settings of the IP cameras in LAN B.Ĭamera 5 "IP Address": 205.234.170.160 port 8005/5001Ĭamera 6 "IP Address": 205.234.170.160 port 8006/5002 The "WAN IP Address" is for remote access to the monitoring page of the VioStor over the Internet. The "IP address" is for the VioStor to acquire the streaming from the VioStor directly and for browsing by LAN users. Then enter the Public IP and the port number of the camera configured on the router in "WAN IP" and "Port" fields on the "Camera Settings" page of the VioStor.Įnter the settings of the IP cameras in LAN A.Ĭamera 1 "IP Address": 192.168.1.101 port 80 (b-2) Sample of the router's port mapping in LAN B:Įnter the IP address of the camera in the "IP address" field of the "Camera Settings" page of the VioStor. Please refer to the user guide of the IP camera for its RTSP port settings. Please check the RTSP (Real-Time Streaming Protocol) port of the IP camera before configuring the port mapping on the router. RTSP port: Configure the protocol for controlling video or audio streaming media. (b-1) Configure the port mapping on the router in LAN B (a-2) Sample of the router's port mapping in LAN A: Note: The default RTP port range of the NVR (VioStor) is 6100~6259.
RTP port: (Configure the port for NVR to receive remote video data from the IP camera) (a-1) Configure the port mapping on the router in LAN A RTSP (Real-Time Streaming Protocol): The protocol for controlling video or audio streaming media.Ĭonfigure the port mapping or virtual server on the router:
RTP (Real-time Transport Protocol): The protocol for delivering video or audio data. In this sample, you must configure the RTP port setting on the router of LAN A and the RTSP port setting on the router of LAN B. Axis, D-link, GANZ, LevelOne or Vivotek cameras that support MPEG4 streaming.
If the IP camera is installed outside the router, you have to configure the RTSP and RTP ports on the router and the NVR so that the NVR can save the recording data from the IP cameras, e.g. Some IP cameras delivers MPEG4 image via RTSP or RTP ports.
#Vienna ensemble pro 6 ip address Pc
In this application, you have to configure the port mapping or virtual server of the routers in LAN A and LAN B and forward the ports to the corresponding LAN IP by the NAT router so that the NVR can save the recording data from the remote IP camera and the remote PC can access the monitoring page over the Internet. Please refer to the user guide of the IP camera for the network configuration.Ĭonfigure the router/ virtual server/ firewall Plan the IP address and port of the NVR, the camera, and the PC.
#Vienna ensemble pro 6 ip address install
Please follow the steps below to install the NVR. Some IP cameras are installed in LAN B behind a different router in a remote location.Īllow the users to connect the NVR from remote PC over the Internet. The VioStor, IP cameras, and the PC are in LAN A.